The first thing you need is a fork. It should have relatively long prongs, and the handle should not be too thick. Make sure the fork you choose for this project fits that criteria, otherwise you will likely experience issues along the way.
1. Put your fork in the door frame hole of the door you wish to create a lock for. Then draw along the edge where the hole meets the edge. When you remove the fork, the marks thus indicate how deep the hole is.
2. Set the fork in a vise to be hammered down where you noted the depth of the hole. Hammer the fork until it is bent to 90 degrees.
3. Use a saw to detach the the fork handle from the prongs, as shown below.
4. Try sliding your handle through the fork’s prongs. If the handle is too thick and won’t go through, file it until it fits.
5. Insert the bent fork prongs into your door frame and close the door.
6. Insert the fork handle through the fork’s prongs.
7. And voila! Your door is locked!
Take a look at this video for clear step-by-step instructions:
Don’t forget to share this useful hack with all your friends!
Published by Newsner, please like.